Strip Led 9,6W/Mt 24V - Cost for meter

Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy.

Junction connector for 220V LED strips.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

The 25watt/meter high brightness and 3600 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 3600lm/mt. IP20. 24V power supply. 140 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 5cm.

8+8watt/meter cob CCT led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This led strip has the possibility of adjusting the color temperature from warm light (2700K) to cold light (6500K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under wall units, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux from 640 to 1440 lm/m. IP20. 24V power supply. 5m reel. The led strip can be cut every 5cm.

Clips for 220V LED strips.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

Linear aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is under the cabinet, inside veils, inside wardrobes and walk-in wardrobes or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.

The 12watt/meter led strip. This is the most commonly used led strip because of its brightness and versatility. Suitable for being applied under and over hanging to achieve a direct or indirect light effect, it is used extensively in furniture stores, clothing stores, veils, bars and anywhere linear light is needed. Light beam at 120° light aperture. Luminous flux 1699lm/mt. IP20. 24V power supply. 140 leds per meter. 5m coil. The led strip can be cut every 5cm, which would be every 7 LEDs.

2 meter retractable angular aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate in a corner and is subsequently shaved flush. Ideal profile for creating design light corners. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.

Minimum purchasable quantity: 2 bars.

RGB kit of 2 led strips of 50cm each. RGB light. Complete with power supply with 5 Volt USB output. Complete kit with remote control for color and brightness adjustment. They are applied to the back of the television as ambient lighting, thanks to the remote control it is possible to obtain all the color games you want. They stick directly to the back of the TV and are powered with a direct USB output to the TV.

Discover the SD290.T T Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

14 watt/meter RGBIC digital cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This LED strip is digital, you will have the possibility to adjust the color of the light to your liking with the 358 color games available on the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 350lm/mt. IP20. 24V power supply. 5m reel. The LED strip can be cut every 10cm.

90° angular connector for 220V LED strips.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

Led strip cob 5m monochromatic colored 14watt/meter with direct connection to 220V. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1200-1300-1350 lm/m. IP65. 220V power supply. 432 LEDs per metre. 5m reel. The LED strip can be cut every 16.6cm.

5m monochromatic COB LED strip of 25 watts/meter with 24V connection.

The COB SURFACE LED strip is a new model of LED strip, ideal for all those who do not like to see the "dots" of the LED.

Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K).

Suitable for any type of application such as the lighting of residential or work environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flowerbeds.

Dimmable LED strip. Luminous flux of 2600-2750-2750 lm/m. IP20. 24V power supply. 528 LEDs per meter. 5m reel. The LED strip can be cut every 5cm.