Dimmable LED Power Supply 12V 100W Ultra Thin Transformer for LED Strip LED Driver
Dimmable LED Power Supply 12V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 12V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 24V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
The 12watt/meter led strip. This is the most commonly used led strip because of its brightness and versatility. Suitable for being applied under and over hanging to achieve a direct or indirect light effect, it is used extensively in furniture stores, clothing stores, veils, bars and anywhere linear light is needed. Light beam at 120° light aperture. Luminous flux 1699lm/mt. IP20. 24V power supply. 140 leds per meter. 5m coil. The led strip can be cut every 5cm, which would be every 7 LEDs.
17W round recessed plasterboard led spotlight ideal for replacing the old halogen spotlights by widening the hole.
It is white with the glass flush, so it disappears into the plasterboard, very elegant.
Luminous flux of 1580lm-1700lm-1700lm with 90 ° opening angle.
Tricolor led spotlight (3000K-4000K-6000K) the color of light can be varied with an integrated switch placed on the back of the spotlight.
Direct connection at 190 ~ 265V with built-in power supply.
This recessed plasterboard led spotlight is also dimmable. Ideal for residential and commercial use.
18Watt round recessed plasterboard led spotlight ideal for confined spaces. Luminous flux of 1450lm with 110 ° opening angle. Available color shades: warm light (3000K) and natural light (4000K). Direct connection to 230V. White border. Ultra-thin, only 31mm thick.
2 meter concealed internal corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.
2 meter flat aluminum profile kit to be smoothed including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate and is subsequently trimmed flush. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum purchasable quantity: 2 bars.
Dimmable LED Power Supply 24V 150W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
20Watt round recessed plasterboard led spotlight ideal for confined spaces. Luminous flux of 1600lm with 110 ° opening angle. Available color shades: warm light (3000K) and natural light (4000K). Direct connection to 230V. White border. Ultra-thin, only 31mm thick.
Square ceiling lamp for ceiling fixture 18W. With a medium angular aperture (120°) and the Luminous Flux of 1600lm. Available in two colour temperatures: Natural White (4000K) and Cold White (6000K). Dimensions: 227x227x35 mm.
Round LED ceiling light fitting 18W. 90 ° light beam and 1300-1350lm luminous flux. Available in two color temperatures: Warm White (3000K) and Natural White (4500K). Dimensions: Ø227x35 mm.
Round led ceiling light 20w fixture. 90 ° light beam and 1450-1550lm luminous flux. Available in two color temperatures: Warm White (3000K) and Natural White (4000K). Dimensions: Ø247x35 mm.
3W round LED steplight. 60 ° light beam and 170lm luminous flux. Material: Aluminum. Available with 3 different color temperatures: Warm White (3000K), Natural White (4500K), and Cold White (6000K). Dimensions: 60x87.5 mm. IP65, suitable for vehicles.
The 20watt/meter LED strips. It is a LED strip that is highly sought after for its brightness and versatility. Suitable for application under and above wall units to obtain a direct or indirect light effect, it is used extensively in furniture factories, clothing stores, veils, bars and anywhere linear light is needed. 120° light beam opening. Luminous flux 2682lm/mt. IP20. 24V power supply. 238 LEDs per meter. 5m reel. The LED strip can be cut every 3cm, every 7 LEDs.
Dimmable LED Power Supply 24V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 12V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
25W round recessed plasterboard led spotlight ideal for replacing the old halogen spotlights by widening the hole.
It is white with the glass flush, so it disappears into the plasterboard, very elegant.
Luminous flux of 2400lm-2600lm-2600lm with 90 ° opening angle.
Tricolor led spotlight (3000K-4000K-6000K) the color of light can be varied with an integrated switch placed on the back of the spotlight.
Direct connection at 190 ~ 265V with built-in power supply.
This recessed plasterboard led spotlight is also dimmable. Ideal for residential and commercial use.
RGB-WHITE controller to adjust the brightness of a LED strip from remote control with high performance. Controls the brightness of all products designed with the constant-voltage circuit (12V-24V). It has the function of memory and 50 degrees of brightness.
Controller with remote control for RGB led strip to adjust the brightness of a high performance remote control led strip. Control the brightness of all products designed with constant voltage circuit (12V-24V). It has memory function and 50 degrees of brightness. Led strip not included.
Monochromatic controller to adjust the brightness of a high performance remote control led strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). It has memory function and 50 degrees of brightness. Led strip and profile not included. Up to 4 zones available. It is supplied with a single receiver, valid for one zone, to divide it into several zones please contact: ordini@sololed.it.
Led picket spotlight. Height 265mm and diameter of 71mm. Adjustable light with 60 ° angle opening. Luminous flux of 240 lumens. Dimmable, ideal for outdoor IP67. Requires 12V power supply. Ideal for lighting plants, signs and paths. Thanks to the stake, it can be planted directly in the ground. It is in great demand for flower beds.
Dimmable LED Power Supply 24V 300W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Round Led steplight 3W. 60 ° light beam and 240lm luminous flux. Material: Aluminum. Available with 3 different color temperatures: Warm White (3000K), Natural White (4000K), and Cool White (6000K). Dimensions: 75x88 mm. IP65, suitable for vehicles.
Recessed wall touch controller for regulating dimmable LED products. It is mainly used to adjust the brightness of a 12-volt and 24-volt LED strip from a high-performance remote control. It has memory function and many brightness variations. It couples with a wireless system to a radio frequency dimmer that allows you to adjust the intensity of the dimmable LED products. Recessed touch controller with a modern style. Dimensions: 87x87mm for the bezel and 33mm for the recess.
12 liter packs of bioethanol, in 1 liter bottles. Convenience package.
Bioethanol is a liquid and colorless fuel, used to power stoves and fireplaces without chimneys.
This fuel is obtained from the fermentation process of biomass, i.e. agricultural products rich in sugars. Since it is a product of natural origin, the combustion of bioethanol significantly reduces CO2 emissions, reduced by approximately 70% compared to those caused by the use of fossil fuels. Completely odorless.
The new package is equipped with a child safety cap to prevent accidental opening. The packaging in one liter bottles makes the product very practical and convenient to keep at home, thus avoiding bulky jerry cans.
Round led steplight 6 Watt. 60° light beam and 480lm luminous flux. Material: Aluminum. Available with 3 different color temperatures: Warm White (3000K), Natural White (4500K), and Cold White (6000K). Dimensions: 128x57 mm. IP65, suitable for vehicles.
Rectangular wall-mounted steplight. External IP65. It is not built into the wall, it is for external use. Downward symmetrical light. White, gray and black border included in the package. Natural light with warm light diffuser included in the package.
Led Strip 25watt/meter. High power led strip, ideal for the main lighting of large rooms and environments. 120 ° light beam opening of the light. Luminous flux of 1840lm / mt. IP20. 24V power supply. 204 leds per meter, type of led: 3014SMD. 5m reel. Available in two shades of light: warm light (3000K) and natural light (4000K). The 25w / m led strip can be cut every 29mm.
Round led steplight 9 Watt. 60° light beam and 720lm luminous flux. Material: Aluminum. Available with 3 different color temperatures: Warm White (3000K), Natural White (4500K), and Cold White (6000K). Dimensions: 178x75 mm. IP65, suitable for vehicles.
4watt and 300lumen professional led table lamp. Multifunctional led table lamp with adjustable led light. Table lamp in plastic and metal. Available in two colors, black and white. Adjustment of brightness and light color. LED table lamp with a modern design ideal for professional studios, design studios and offices.
Led panel 60x120 cm. With light beam of 120 ° and luminous flux of 4470-4800 lm. 48W corresponding to 260W. Material: Aluminum. Available with 2 different color temperatures: Warm White Light (3000K) and Natural Light (4500K). White panel border.
Enhance your lighting with the set of 5 SD290/S12 LED Profiles, designed for perfect integration into plasterboard. Each 2 metre long profile is made of high quality aluminium with a matt cover, ideal for LED strips up to 12.4 mm wide. The ease of installation directly onto the post, with a filler gasket included, makes this set the ideal choice for refined and discreet lighting.
Round led panel of 50w and ø60cm. UGR <19, anti-glare system. Light beam of 110° and Luminous flux of 5000-5400 lm. 50W corresponding to 200W. Material: Aluminum. Available with two different color temperatures: warm white (3000K) and natural white (4000K). Bi-directional light, above and below. Suspension kit with canopy included. Ideal for use in the kitchen, bedrooms or shops. Very elegant led panel with bidirectional light.
Design floor bioethanol fireplace that does not require any system or flue to function.
It has a white metal structure and tempered protective glass.
It is equipped with a 1.5 liter stainless steel burner which contains a specific glass fiber inside which allows it to burn for up to 3 hours at maximum intensity. The power of the bio-fireplace is 3.7 kW/h.
Excellent product that is used both to heat rooms as it gives off real heat and as a piece of furniture. Much appreciated as a gift idea.
Dimensions: 78cmx25cmxH58cm
Design floor bioethanol fireplace that does not require any system or flue to function.
It has a matt black metal structure and tempered protective glass.
It is equipped with a 1.5 liter stainless steel burner which contains a specific glass fiber inside which allows it to burn for up to 3 hours at maximum intensity. The power of the bio-fireplace is 3.7 kW/h.
Excellent product that is used both to heat rooms as it gives off real heat and as a piece of furniture. Much appreciated as a gift idea.
Dimensions: 78cmx25cmxH58cm
Bioethanol burner Standing insert 40cm. Structure made of stainless steel. Insert with a 22cm stainless steel burner with a capacity of 1 liter and a power of about 2kw, with a ceramic sponge inside to increase the duration of the ignition. Dimensions: 400x200x80mm deep. Furniture product. Gives off real heat. Does not include protective glass. Design bioethanol fireplace ideal for placing on a special, heat-resistant surface. Made in the EU. It has TUV certification.
Bioethanol burner Standing insert 50cm. Structure made of stainless steel. Insert with a 32cm stainless steel burner with a capacity of 1 liter and a power of about 2kw, with a ceramic sponge inside to increase the duration of the ignition. Dimensions: 500x200x80mm deep. Furniture product. Gives off real heat. Does not include protective glass. Design bioethanol fireplace ideal for placing on a special, heat-resistant surface. Made in the EU. It has TUV certification.
Bioethanol burner Standing insert 60cm. Structure made of stainless steel. Insert with a 45cm stainless steel burner with a capacity of 1 liter and a power of about 2kw, with a ceramic sponge inside to increase the duration of the ignition. Dimensions: 600x190x80 mm deep. Furniture product. Gives off real heat. It does not include protective glass but has a grid to protect the flame. Design bioethanol fireplace ideal for placing on a special, heat-resistant surface. Made in the EU. It has TUV certification.
Bioethanol burner Standing insert 60cm. Structure made of stainless steel. Insert with a 42cm stainless steel burner with a capacity of 1 liter and a power of about 2kw, with a ceramic sponge inside to increase the duration of the ignition. Dimensions: 600x200x80 mm deep. Furniture product. Gives off real heat. Does not include protective glass. Design bioethanol fireplace ideal for placing on a special, heat-resistant surface. Made in the EU. It has TUV certification.