LED strip 20 watt/meter powered by 24V, excellent brightness, it is the strip used for the major applications. This type of strip is suitable in all those places where an intense light beam is needed. Each LED strip must be applied to an aluminum profile to dissipate heat and extend the life of the LED strip.
This LED strip has a light opening angle thanks to which it is possible to have a 120° light, with a fairly widespread beam.
Where can I place my 20 W/m LED strip?
It is an LED strip with an adhesive back (3M adhesive), essential for gluing the LED strip onto an aluminum profile and dissipating its heat. The 20 watt/meter LED strip is the one most used, it finds its application under wall units in kitchens, above wall units or above furniture to obtain an indirect light effect or for main lighting in ceilings. It is also used as main lighting in plasterboard recessed profiles, or in display counters with the classic or angular profile.
There are also different aluminum profiles for the various applications of the LED strip, we have the plasterboard recessed profile, the 90° corner profile, the walkable profile, the round profile, the classic profile to create rods under wall units and finally the flat strip of aluminum used to install the LED strip in the plasterboard covers.
This type of LED strip can only be used indoors, on request you can also have waterproof LED strips.
The LED strip requires 24 Volt power, therefore it requires a power supply.
Each LED strip is dimmable, meaning it is possible to vary the intensity of the light with the appropriate controllers with remote control.
Luminous flux of 2682 lumens per meter, 238 LEDs per meter.
This LED strip is divisible every 7 LEDs and can be cut every 3 cm.
The light is available in three color shades: warm light (3000K), natural light (4000K) and cold light (6000K).
5 meter reel.