Description
Led strip 20watt / meter powered at 24Volt. This type of strip is suitable in all those places where an intense light beam is required. Excellent brightness. Each led strip must be applied on an aluminum profile to dissipate the heat.
This led strip has an opening angle of the light thanks to which it is possible to have a light at 120 °, with a fairly diffused beam.
Where can I place my 20W / mt led strip?
It is a led strip with an adhesive back (3M adhesive), useful to be glued on an aluminum profile necessary to dissipate the heat. The 20watt / meter strip is the LED strip that is mostly used as the main lighting of environments, it also finds its application in the veils, in the recessed plasterboard profiles, or in the display counters with the classic or angular profile. In many circumstances a controller is used to adjust the intensity of the light from the comfort of the sofa or desk with a special remote control.
Thanks to the conformation of the LEDs in the strip it is possible to obtain a continuous light effect without seeing the single dots that usually annoy the eye.
There are also different aluminum profiles for the various applications of the led strip, we have the recessed plasterboard profile, the 90 ° angular profile, the walkable profile, the round profile, the classic profile to create rods under the wall unit and finally the plate. aluminum used to install the led strip in the plasterboard veils.
The 20w / mt led strip can be cut every 25 mm, for different sizes from those indicated on the site contact us at the email address: ordini@sololed.it.
This type of led strip can be used exclusively indoors, on request you can also have waterproof led strips with IP64 or IP67 protection.
Our led strips must be powered at 24 Volts, therefore they need a power supply, which you can find in the appropriate section, where you will have the choice of three types of power supplies, from junction box, protected or watertight.
Each led strip of www.goodled.it is dimmable, that is, it is possible to vary the intensity of the light, you can do it with the special controllers with remote control that you can find on our site.
The light is available in two shades of color: warm light (3000K) and natural light (4000K).
SUPPLY: | 24V DC |
POWER: | 20W/MT |
COLOUR: |
3000K-4000K |
LUMINOUS FLUX: |
IP20 1440 LM/MT |
ANGULAR APERTURE: | 120° |
DIMENSION: | H 10*5000mm |
NOTES: | IP20 |