Remote control for remote control of COB 24V CCT led strips

15watt/meter monochromatic 5m COB LED strip with direct connection at 24V.

The COB led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led.

Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K).

Suitable for any type of application such as the lighting of residential or work environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flowerbeds.

Dimmable LED strip. 180° light beam opening. Luminous flux of 1450-1500-1500lm/m. IP65. 24V power supply. 528 LEDs per meter. 5m reel. The LED strip can be cut every 4.5cm.

The 12watt/meter led strip. This is the most commonly used led strip because of its brightness and versatility. Suitable for being applied under and over hanging to achieve a direct or indirect light effect, it is used extensively in furniture stores, clothing stores, veils, bars and anywhere linear light is needed. Light beam at 120° light aperture. Luminous flux 1699lm/mt. IP20. 24V power supply. 140 leds per meter. 5m coil. The led strip can be cut every 5cm, which would be every 7 LEDs.

This minimal LED lamp combines design and functionality. The dimensions vary from 5 to 20 meters, so the lamp can be positioned in almost any environment.

The LED strip and power supply are included, so it is not necessary to purchase them separately.

The 25watt/meter high brightness and 3600 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 3600lm/mt. IP20. 24V power supply. 140 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 5cm.

Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 10mm profile. Model Carrara M by Gea Luce.

Sealant 50ml tube.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

15 watt/meter RGB cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This led strip is rgb, you will have the possibility to adjust the color of the light to your liking with the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Number of LEDs: 840 LEDs/m. IP20. 12V power supply. 5m reel. The led strip can be cut every 5cm.

Discover our selection of professional LED strips, ideal for best illuminating food counters in the gastronomic and commercial sectors. Each activity requires specific lighting and our specialized products ensure the best performance.

Our professional strips enhance the colors of foods, making them more inviting and realistic. You will find LED strips suitable for every type of refrigerated counter: from meat to fish to cured meats, from bread to cheeses, up to fruit and vegetables.

Entrust your professional lighting to our specialized LED strips and guarantee a welcoming and inviting environment for your customers.

9,6watt/meter led strip. Ideal for use under the wall unit or in the recessed strips as courtesy lighting. 120° light beam. Luminous flux of 720lm/mt. IP20. 24V power supply. 120 LEDs per meter, type of LED: 3528 SMD. 5m reel. The 9,6w/m led strip can be cut every 5cm.

Closing cap for 220V LED strips.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

5m monochromatic COB LED strip of 15watt/meter with 12V connection.

The COB LED strip is a new model of LED strip, ideal for all those who do not like to see the "dots" of the LED.

Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6500K).

Suitable for any type of application such as the lighting of residential or work environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flowerbeds.

Dimmable LED strip. 180° light beam opening. Luminous flux of 1300-1400-1500lm/m. IP65. 24V power supply. 528 LEDs per meter. 5m reel. The LED strip can be cut every 2.2cm.

Led Strip 25watt/meter. High power led strip, ideal for the main lighting of large rooms and environments. 120 ° light beam opening of the light. Luminous flux of 1840lm / mt. IP20. 24V power supply. 204 leds per meter, type of led: 3014SMD. 5m reel. Available in two shades of light: warm light (3000K) and natural light (4000K). The 25w / m led strip can be cut every 29mm.

Recessed aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is in plasterboard or wood, it is used to illuminate rooms, shops or interiors of furniture or walk-in closets. Single kit including 2 meters of recessed aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.

Discover the SD290.T T Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

Discover the SD290.X X Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.