Recessed Profile Kit 2m with Satin Cover, 2 Caps and 2 Clips

Sealant 50ml tube.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

The 20watt/meter high brightness and 2900 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2900lm/mt. IP20. 24V power supply. 112 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 6.5cm.

2 meter retractable angular aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate in a corner and is subsequently shaved flush. Ideal profile for creating design light corners. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.

Minimum purchasable quantity: 2 bars.

The high brightness and 4200 lumens per meter 30watt / meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 4200lm / mt. IP20. 24V power supply. 168 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 4.2cm.

Junction connector for 220V LED strips.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

The 20watt/meter LED strips. It is a LED strip that is highly sought after for its brightness and versatility. Suitable for application under and above wall units to obtain a direct or indirect light effect, it is used extensively in furniture factories, clothing stores, veils, bars and anywhere linear light is needed. 120° light beam opening. Luminous flux 2682lm/mt. IP20. 24V power supply. 238 LEDs per meter. 5m reel. The LED strip can be cut every 3cm, every 7 LEDs.

The 12watt/meter led strip. This is the most commonly used led strip because of its brightness and versatility. Suitable for being applied under and over hanging to achieve a direct or indirect light effect, it is used extensively in furniture stores, clothing stores, veils, bars and anywhere linear light is needed. Light beam at 120° light aperture. Luminous flux 1699lm/mt. IP20. 24V power supply. 140 leds per meter. 5m coil. The led strip can be cut every 5cm, which would be every 7 LEDs.

Led strip cob milky 5m monochromatic colored 14watt/meter with direct connection to 220V. The Cob Milky led strip is a new model of the most beautiful led strip as a finishing touch, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1080-1130-1230 lm/m. IP65. 220V power supply. 432 LEDs per metre. 5m reel. The LED strip can be cut every 16.6cm.

Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 10mm profile. Model Carrara M by Gea Luce.

14 watt/meter RGBIC digital cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This LED strip is digital, you will have the possibility to adjust the color of the light to your liking with the 358 color games available on the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 350lm/mt. IP20. 24V power supply. 5m reel. The LED strip can be cut every 10cm.

Led strip cob milky 20m monochromatic colored 14watt/meter with direct connection to 220V. The Cob Milky led strip is a new model of the most beautiful led strip as a finishing touch, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1080-1130-1230 lm/m. IP65. 220V power supply. 432 LEDs per metre. 20m reel. The LED strip can be cut every 16.6cm.

14.4 watt per meter RGB-White led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60Led. RGB LED strip with double light function and two colors to choose between warm light (3000K) and natural light (4000K). 5m reel. Divisible by the meter. Led strip with double function, RGB and white, ideal to be used to create plays of light or atmosphere in residential and commercial environments.

RGB kit of 2 led strips of 50cm each. RGB light. Complete with power supply with 5 Volt USB output. Complete kit with remote control for color and brightness adjustment. They are applied to the back of the television as ambient lighting, thanks to the remote control it is possible to obtain all the color games you want. They stick directly to the back of the TV and are powered with a direct USB output to the TV.