Low brightness 4.8 watt / meter led strip powered at 24Volt. This type of strip is suitable in all those places where presence light is required. Each led strip must be applied on an aluminum profile that dissipates the heat.
This led strip has an opening angle of the light thanks to which it is possible to have a light at 120 °, with a fairly diffused beam.
Where can I place my 4.8W / m low power led strip?
It is a led strip with an adhesive back (3M adhesive), to be glued on an aluminum profile in order to dissipate the heat and ensure the perfect functioning of the strip over time. The 4.8 watt / meter strip is the least powerful and is used for courtesy lighting, night light or to have a small beam of light.
There are also different aluminum profiles for the various applications of the LED strip, we have the recessed plasterboard profile, the 90 ° angular profile, the walkable profile, the round profile, the classic profile to create under-cabinet rods and finally the aluminum used to install the led strip in the plasterboard veils.
This type of led strip can be used exclusively indoors, on request it is also possible to have waterproof LED strips with IP64 and IP67 protection degrees.
The led strips must be powered at 24 Volts, so they need a power supply.
Each led strip is dimmable, i.e. it is possible to vary the intensity of the light with a remote control and a special controller.
The light is available in two shades of color: warm light (3000K) and natural light (4000K).
Sectionable every 10 centimeters.