Description
Low brightness led strip of 9,6 watt / meter with 24Volt power supply. This type of strip is suitable in all those places where presence light is required. Each led strip must be applied on an aluminum profile to dissipate the heat and ensure the correct operation of the led strip.
This led strip has an opening angle of the light thanks to which it is possible to have a light at 120 °, with a fairly diffused beam.
Where can I place my 9.6 Watt / meter led strip?
It is a led strip with the adhesive back (3M adhesive), to glue it on an aluminum profile to dissipate the heat. The 9.6 watt / meter strip is not very powerful and is used for lighting under the wall unit, in the veils or as a courtesy light in the recessed profiles or passage light.
There are also different aluminum profiles for the various applications of the LED strip, we have the recessed plasterboard profile, the 90 ° angular profile, the walkable profile, the round profile, the classic profile to create under-cabinet rods and finally the aluminum used to install the led strip in the plasterboard veils.
The led strips can be cut every 5 cm, for different sizes from those indicated on the site contact us: ordini@sololed.it
This type of led strip can be used exclusively indoors, on request you can also have waterproof LED strips.
Our led strips are powered at 24 Volts, so they need a power supply.
Each Sololed led strip is dimmable, that is, it is possible to vary the amount of light with a remote control and it is possible to do it with the appropriate controllers.
The light is available in two shades of color: warm light (3000K) and natural light (4000K).
SUPPLY: | 24V DC |
POWER: | 9,6W/M |
COLOUR: |
3000K-4000K |
LUMINOUS FLUX: |
720lm/mt |
ANGULAR APERTURE: | 120° |
DIMENSION: | H 8*5000mm |