Description
High brightness 25 watt / meter led strip powered at 24Volt. This type of strip is suitable in all those places where a very intense beam of light is required. Each led strip must be applied on an aluminum profile that dissipates the heat.
This led strip has an opening angle of the light thanks to which it is possible to have a light at 120 °, with a fairly diffused beam.
Where can I place my 25 watt/meter high power led strip?
It is a high power led strip, 25 watt / meter with the adhesive back (3M adhesive), to be glued on an aluminum profile ideal for dissipating heat and guaranteeing the correct functioning of the led strip. The 25 w / m strip is the most powerful and is used as the main lighting within the recessed profile or the classic profile.
There are also different aluminum profiles for the various applications of the LED strip, we have the recessed plasterboard profile, the 90 ° angular profile, the walkable profile, the round profile, the classic profile to create under-cabinet rods and finally the aluminum used to install the LED strip in the plasterboard veils.
This type of led strip can be used exclusively indoors, on request it is also possible to have waterproof LED strips with a degree of protection IP64 or IP67.
The led strips must be powered at 24 Volts, so they need a power supply.
Each Sololed led strip is dimmable, i.e. it is possible to vary the intensity of the light thanks to a remote control and a special controller.
The light is available in two shades of color: warm light (3000K) and natural light (4000K).
SUPPLY: | 24V DC |
POWER: | 25W |
COLOUR: | 3000K-4000K |
LUMINOUS FLUX: | 1840lm/mt |
ANGULAR APERTURE: | 120° |
DIMENSION: | H 10*5000 |
NOTES: | IP20 |