Clips for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
Closing cap for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
4.8 watt / meter led strip. Low intensity LED strip, ideal to be used as a courtesy light, passing light or for plays of light. 120 ° light beam as light opening. Luminous flux of 360lm / mt. IP20. 24V power supply. 60 LEDs per meter, type of LED: 3528SMD. 5m reel. The led strip is available in two color shades: warm light (3000K) and natural light (4000K). The 4.8 watt / meter led strip can be cut every 10cm.
9,6watt/meter led strip. Ideal for use under the wall unit or in the recessed strips as courtesy lighting. 120° light beam. Luminous flux of 720lm/mt. IP20. 24V power supply. 120 LEDs per meter, type of LED: 3528 SMD. 5m reel. The 9,6w/m led strip can be cut every 5cm.
Junction connector for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
Sealant 50ml tube.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
The 14.4watt/meter led strips. It is the most used led strip. Suitable to be applied under the wall unit, above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, in veils, in bars and in any place where linear light is required. Light beam at 120 ° of light opening. Luminous flux 1080lm / mt. IP20. 24V power supply. 60 leds per meter, type of led: 3014SMD. 5m reel. The led strip can be cut every 5cm.
The high brightness 15watt/meter led strip, 2100 lumens per meter. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2100lm/mt. IP20. 24V power supply. 84 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 8.5cm.
14.4 watt per meter RGB led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60LED. 5m reel. Divisible by every meter. Led strip ideal for creating plays of light or atmosphere. It is used a lot in houses and apartments or in the commercial field in shops or exhibitions. RGB led strip also used a lot in hotels and accommodation facilities.
90° angular connector for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
The 20watt/meter high brightness and 2900 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2900lm/mt. IP20. 24V power supply. 112 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 6.5cm.
Plug power cable for 220 volt led strips.
Only compatible with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027, 927028, 927019, 927029, 927031, 927033, 927034 and 927035.
Led strip 20watt/mt, ideal for the main lighting of rooms, shops or supermarkets. Very bright, with closely spaced LEDs that create a single strip of light without dots. 120 ° light beam. Luminous flux 1440lm / mt. IP20. 24V power supply. 240led per meter, type of led 3528SMD. 5m reel. Cut every 25mm.
Led Strip 25watt/meter. High power led strip, ideal for the main lighting of large rooms and environments. 120 ° light beam opening of the light. Luminous flux of 1840lm / mt. IP20. 24V power supply. 204 leds per meter, type of led: 3014SMD. 5m reel. Available in two shades of light: warm light (3000K) and natural light (4000K). The 25w / m led strip can be cut every 29mm.
24V protected power supply. Power of 20W, 0.83A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Snappy brand, code SNP20-24VF
14.4 watt per meter RGB-White led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60Led. RGB LED strip with double light function and two colors to choose between warm light (3000K) and natural light (4000K). 5m reel. Divisible by the meter. Led strip with double function, RGB and white, ideal to be used to create plays of light or atmosphere in residential and commercial environments.
Waterproof 12V power supply. Power of 12W, 1A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.
The 25watt/meter high brightness and 3600 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 3600lm/mt. IP20. 24V power supply. 140 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 5cm.
Remote control to remotely control the Cob Digital RGBIC led strips in 24V.
Compatible with the IP20 5m Dynamic RGBIC 14W/MT 24V COB led strip.
Remote control to remotely control the Cob CCT led strips in 24V.
Compatible with 8+8W/MT 24V 5m COB IP20 led strip - CCT - 2700K-6500K.
Recessed aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is in plasterboard or wood, it is used to illuminate rooms, shops or interiors of furniture or walk-in closets. Single kit including 2 meters of recessed aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
Linear aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is under the cabinet, inside veils, inside wardrobes and walk-in wardrobes or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
Angular aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. It is used to outline the rooms, under the wall unit or in the veils to make the most of the light from the LED strip. Single kit including 2 meters of aluminum corner profile, 2 meters of satin cover, 2 caps and 2 clips.
The high brightness and 4200 lumens per meter 30watt / meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 4200lm / mt. IP20. 24V power supply. 168 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 4.2cm.
Switching power supply from 24V to 24W. Plug-in power supply to be installed with direct connection to the led strip. Ideal under cabinet, combinable with the touch dimmer. IP20. Led strip not included.
Waterproof 12V power supply. Power of 24W, 2A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.
Monochrome controller to adjust the brightness of a LED strip Touch dimmer to adjust the brightness of a led strip from 0% to 100% with a gradual adjustment. It fits inside the aluminum profile and connects to the led strip. Control the brightness of all products designed with constant voltage circuit (12V-24V). Led strip and profile not included. Finds its greatest application under the wall unit.from remote control with high performance. Controls the brightness of all products designed with the constant-voltage circuit (12V-24V). It has the function of memory and 50 degrees of brightness.
2 meter flat aluminum profile kit to be smoothed including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate and is subsequently trimmed flush. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum purchasable quantity: 2 bars.
2 meter retractable angular aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate in a corner and is subsequently shaved flush. Ideal profile for creating design light corners. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum purchasable quantity: 2 bars.
RGB kit of 2 led strips of 50cm each. RGB light. Complete with power supply with 5 Volt USB output. Complete kit with remote control for color and brightness adjustment. They are applied to the back of the television as ambient lighting, thanks to the remote control it is possible to obtain all the color games you want. They stick directly to the back of the TV and are powered with a direct USB output to the TV.
24V junction box power supply. Power of 35W, 1.5A. Indoor power supply, IP20. Ideal for powering led strips.
Meanwell power supply with code LRS-35-24.
24V protected power supply. Power of 60W, 2.08A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Closed power supply, protected from direct dust exposure, compared to grid junction box power supplies, it is good to be placed on furniture, shelves or kitchens.
24V junction box power supply. Power of 75W, 3.2A. Indoor power supply, IP20. Ideal for led strips.
Meanwell power supply with code LRS-75-24.
24V junction box power supply. Power of 100W, 4.5A. Indoor power supply, IP20. Ideal for powering led strips. Meanwell product with code LRS-100-24.
2 meter retractable angular aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate in a corner and is subsequently shaved flush. Ideal profile for creating design light corners. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum purchasable quantity: 2 bars.
The 12watt/meter led strip. This is the most commonly used led strip because of its brightness and versatility. Suitable for being applied under and over hanging to achieve a direct or indirect light effect, it is used extensively in furniture stores, clothing stores, veils, bars and anywhere linear light is needed. Light beam at 120° light aperture. Luminous flux 1699lm/mt. IP20. 24V power supply. 140 leds per meter. 5m coil. The led strip can be cut every 5cm, which would be every 7 LEDs.
Waterproof 12V power supply. Power of 60W, 5A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.
Protected power supply 24Volt. Power of 50W, 2.08A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected.
RGB-WHITE controller to adjust the brightness of a LED strip from remote control with high performance. Controls the brightness of all products designed with the constant-voltage circuit (12V-24V). It has the function of memory and 50 degrees of brightness.
Controller with remote control for RGB led strip to adjust the brightness of a high performance remote control led strip. Control the brightness of all products designed with constant voltage circuit (12V-24V). It has memory function and 50 degrees of brightness. Led strip not included.
24V junction box power supply. Power of 150W, 6.5A. Indoor power supply, IP20. Ideal for led strips.
Meanwell power supply code LRS-150-24.
Monochromatic controller to adjust the brightness of a high performance remote control led strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). It has memory function and 50 degrees of brightness. Led strip and profile not included. Up to 4 zones available. It is supplied with a single receiver, valid for one zone, to divide it into several zones please contact: ordini@sololed.it.
Universal Smart Dimmer 220-240V AC. Can be used to turn on, turn off and dim: dimmable LED, CFL, incandescent and halogen lamps. Ideal for controlling lights in living rooms, apartments, hotels, hospitals, shops etc. Remote light control via Tablet and Smartphone: switching on, off and adjusting light intensity. Control via one or more buttons connected to the dimmer.
The 20watt/meter LED strips. It is a LED strip that is highly sought after for its brightness and versatility. Suitable for application under and above wall units to obtain a direct or indirect light effect, it is used extensively in furniture factories, clothing stores, veils, bars and anywhere linear light is needed. 120° light beam opening. Luminous flux 2682lm/mt. IP20. 24V power supply. 238 LEDs per meter. 5m reel. The LED strip can be cut every 3cm, every 7 LEDs.
24V protected power supply. Power of 100W, 4.17A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Ideal to use in the veils or above the wall units thanks to its size, narrow and long.
Recessed wall touch controller for regulating dimmable LED products. It is mainly used to adjust the brightness of a 12-volt and 24-volt LED strip from a high-performance remote control. It has memory function and many brightness variations. It couples with a wireless system to a radio frequency dimmer that allows you to adjust the intensity of the dimmable LED products. Recessed touch controller with a modern style. Dimensions: 87x87mm for the bezel and 33mm for the recess.
LED controller for regulating common anode (positive pole) RGB LED strips and white light LED strips with working voltage between 12V DC and 24V DC.
This controller is compatible with all Alcapower RGB, RGB-W and monochrome LED strips.
Allows configuration with various Smart control apps, such as Tuya, Alexa and Google Home.
You will be able to control all the functions of the LED strips remotely.
15watt/meter colored monochromatic cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in four colors: blue, green, yellow and red. Suitable for particular applications, to create atmospheres of various kinds thanks to these colored monochromatic led strips. Light beam with 180° light opening. Variable luminous flux based on color. IP20. 24V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs / m. 5m reel. The led strip can be cut every 10cm.
15watt/meter colored monochromatic 5m cob led strip IP65. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as room lighting, shop lighting, professional offices, products on display or under the wall unit, also ideal for outdoor use. Dimmable led strip. Light beam with 180 ° light opening. Luminous flux of 1300-1500 lm/mt. IP65. 12V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs/m. 5m reel. The led strip can be cut every 10cm.
15watt/meter colored monochromatic 5m cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under cabinet, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180 ° light opening. Luminous flux of 1300-1500 lm / mt. IP20. 12V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs / m. 5m reel. The led strip can be cut every 10cm.
15watt/meter colored monochromatic cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under cabinet, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180 ° light opening. Luminous flux of 1350-1500 lm/mt. IP20. 24V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs/m. 5m reel. The led strip can be cut every 10cm.
24V junction box power supply. Power of 200W, 8.4A. Indoor power supply, IP20. Ideal for high power led strips or long stretches of strips. Meanwell power supply with code RSP-200-24.
Led strip cob 5m monochromatic colored 14watt/meter with direct connection to 220V. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1200-1300-1350 lm/m. IP65. 220V power supply. 432 LEDs per metre. 5m reel. The LED strip can be cut every 16.6cm.
Led strip cob milky 5m monochromatic colored 14watt/meter with direct connection to 220V. The Cob Milky led strip is a new model of the most beautiful led strip as a finishing touch, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1080-1130-1230 lm/m. IP65. 220V power supply. 432 LEDs per metre. 5m reel. The LED strip can be cut every 16.6cm.
Smartluce accessory, is a Wifi phase cut dimmer. This accessory is necessary to connect compatible Fabas Luce ceiling lights to smart devices such as Alexa or Google Home. The whole series of chandeliers and ceiling lights bearing the Smartluce logo can be adjusted through an app on the smartphone and with the Wifi connection.
Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy.
Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 10mm profile. Model Carrara M by Gea Luce.
15 watt/meter RGB cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This led strip is rgb, you will have the possibility to adjust the color of the light to your liking with the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Number of LEDs: 840 LEDs/m. IP20. 24V power supply. 5m reel. The led strip can be cut every 5cm.
Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 20mm profile or two 10mm strips. Model Carrara G by Gea Luce.
15 watt/meter RGB cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This led strip is rgb, you will have the possibility to adjust the color of the light to your liking with the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Number of LEDs: 840 LEDs/m. IP20. 12V power supply. 5m reel. The led strip can be cut every 5cm.
8+8watt/meter cob CCT led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This led strip has the possibility of adjusting the color temperature from warm light (2700K) to cold light (6500K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under wall units, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux from 640 to 1440 lm/m. IP20. 24V power supply. 5m reel. The led strip can be cut every 5cm.
14 watt/meter RGBIC digital cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This LED strip is digital, you will have the possibility to adjust the color of the light to your liking with the 358 color games available on the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 350lm/mt. IP20. 24V power supply. 5m reel. The LED strip can be cut every 10cm.
Colored monochromatic 20m cob led strip 15watt/meter. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° light opening. Luminous flux of 1200-1350 lm/mt. IP65. 220V power supply. 60 LEDs per meter, number of LEDs: 432 LEDs / m. 20m reel. The led strip can be cut every 10cm.
Led strip cob milky 20m monochromatic colored 14watt/meter with direct connection to 220V. The Cob Milky led strip is a new model of the most beautiful led strip as a finishing touch, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1080-1130-1230 lm/m. IP65. 220V power supply. 432 LEDs per metre. 20m reel. The LED strip can be cut every 16.6cm.