Dimmable power supply 75W 24V LEF LIGHTING For LED strips

15watt/meter colored monochromatic cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under cabinet, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180 ° light opening. Luminous flux of 1350-1500 lm/mt. IP20. 24V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs/m. 5m reel. The led strip can be cut every 10cm.

The 12watt/meter led strip. This is the most commonly used led strip because of its brightness and versatility. Suitable for being applied under and over hanging to achieve a direct or indirect light effect, it is used extensively in furniture stores, clothing stores, veils, bars and anywhere linear light is needed. Light beam at 120° light aperture. Luminous flux 1699lm/mt. IP20. 24V power supply. 140 leds per meter. 5m coil. The led strip can be cut every 5cm, which would be every 7 LEDs.

The 20watt/meter LED strips. It is a LED strip that is highly sought after for its brightness and versatility. Suitable for application under and above wall units to obtain a direct or indirect light effect, it is used extensively in furniture factories, clothing stores, veils, bars and anywhere linear light is needed. 120° light beam opening. Luminous flux 2682lm/mt. IP20. 24V power supply. 238 LEDs per meter. 5m reel. The LED strip can be cut every 3cm, every 7 LEDs.

The 8watt/meter LED strips. It is the most commonly used LED strip, due to its brightness and versatility. Suitable for application under and above wall units to obtain a direct or indirect light effect, it is used extensively in furniture factories, clothing stores, veils, bars and anywhere linear light is needed. 120° light beam opening. Luminous flux 1093lm/mt. IP20. 24V power supply. 70 LEDs per meter. 5m reel. The LED strip can be cut every 10cm, which would be every 7 LEDs.

The 5watt/meter LED strips. It is a LED strip used in environments where low brightness or presence light is required. Suitable for application under and above wall units to obtain a direct or indirect light effect. 120° light beam opening. Luminous flux 610lm/m. IP20. 24V power supply. 60 LEDs per meter. 5m reel. The LED strip can be cut every 10cm, which would be every 6 LEDs.

15watt/meter monochromatic 5m COB LED strip with direct connection at 24V.

The COB led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led.

Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K).

Suitable for any type of application such as the lighting of residential or work environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flowerbeds.

Dimmable LED strip. 180° light beam opening. Luminous flux of 1450-1500-1500lm/m. IP65. 24V power supply. 528 LEDs per meter. 5m reel. The LED strip can be cut every 4.5cm.

5m monochromatic COB LED strip of 25 watts/meter with 24V connection.

The COB SURFACE LED strip is a new model of LED strip, ideal for all those who do not like to see the "dots" of the LED.

Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K).

Suitable for any type of application such as the lighting of residential or work environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flowerbeds.

Dimmable LED strip. Luminous flux of 2600-2750-2750 lm/m. IP20. 24V power supply. 528 LEDs per meter. 5m reel. The LED strip can be cut every 5cm.

This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 100W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.

Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.

Power supply LED driver 24Vdc 100W 4160mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V</ p>

This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 150W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.

Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.

Power supply LED driver 24Vdc 150W 6250mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V