LED strip 5 watt/meter powered by 24V, it is the strip used for applications in environments where presence light is required. This type of strip is suitable in all those places where a low light beam is needed. Each LED strip must be applied to an aluminum profile to dissipate heat and extend the life of the LED strip.
This LED strip has a light opening angle thanks to which it is possible to have a 120° light, with a fairly widespread beam.
Where can I place my 5 watt/meter LED strip?
It is an LED strip with an adhesive back (3M adhesive), essential for gluing the LED strip onto an aluminum profile and dissipating its heat. The 5 watt/meter LED strip finds its application where low brightness or presence light is required.
There are also different aluminum profiles for the various applications of the LED strip, we have the plasterboard recessed profile, the 90° corner profile, the walkable profile, the round profile, the classic profile to create rods under wall units and finally the flat strip of aluminum used to install the LED strip in the plasterboard covers.
This type of LED strip can only be used indoors, in fact it has an IP20 protection rating.
On our site you can find strips with a higher degree of protection, suitable for outdoors.
The LED strip requires 24 Volt power, therefore it requires a power supply.
Each LED strip is dimmable, meaning it is possible to vary the intensity of the light with the appropriate controllers with remote control.
The light is available in two color shades: warm light (3000K), natural light (4000K).
Dimensions: 5000 x 8 x h.1.3mm
5 meter reel.