Linear Profile kit 2m with Satin Cover, 2 Caps and 2 Clips.

15 watt/meter RGB cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This led strip is rgb, you will have the possibility to adjust the color of the light to your liking with the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Number of LEDs: 840 LEDs/m. IP20. 24V power supply. 5m reel. The led strip can be cut every 5cm.

The 5watt/meter LED strips. It is a LED strip used in environments where low brightness or presence light is required. Suitable for application under and above wall units to obtain a direct or indirect light effect. 120° light beam opening. Luminous flux 610lm/m. IP20. 24V power supply. 60 LEDs per meter. 5m reel. The LED strip can be cut every 10cm, which would be every 6 LEDs.

15watt/meter colored monochromatic cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in four colors: blue, green, yellow and red. Suitable for particular applications, to create atmospheres of various kinds thanks to these colored monochromatic led strips. Light beam with 180° light opening. Variable luminous flux based on color. IP20. 24V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs / m. 5m reel. The led strip can be cut every 10cm.

2 meter flat aluminum profile kit to be smoothed including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate and is subsequently trimmed flush. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.

Minimum purchasable quantity: 2 bars.

Sealant 50ml tube.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

The 25watt/meter high brightness and 3600 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 3600lm/mt. IP20. 24V power supply. 140 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 5cm.

Led strip cob 5m monochromatic colored 14watt/meter with direct connection to 220V. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1200-1300-1350 lm/m. IP65. 220V power supply. 432 LEDs per metre. 5m reel. The LED strip can be cut every 16.6cm.

The 8watt/meter LED strips. It is the most commonly used LED strip, due to its brightness and versatility. Suitable for application under and above wall units to obtain a direct or indirect light effect, it is used extensively in furniture factories, clothing stores, veils, bars and anywhere linear light is needed. 120° light beam opening. Luminous flux 1093lm/mt. IP20. 24V power supply. 70 LEDs per meter. 5m reel. The LED strip can be cut every 10cm, which would be every 7 LEDs.

9,6watt/meter led strip. Ideal for use under the wall unit or in the recessed strips as courtesy lighting. 120° light beam. Luminous flux of 720lm/mt. IP20. 24V power supply. 120 LEDs per meter, type of LED: 3528 SMD. 5m reel. The 9,6w/m led strip can be cut every 5cm.

Monochromatic controller to adjust the brightness of a high-performance remote control LED strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). It has memory function and 50 degrees of brightness. LED strip and profile not included. Up to 4 receivers can be installed and controlled with a single remote control.

Without the Compatible remote control the receiver does not work.

By purchasing this item you will only receive the receiver without the remote control, which must be purchased separately. You can find it at this LINK.

15watt/meter colored monochromatic 5m cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under cabinet, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180 ° light opening. Luminous flux of 1300-1500 lm / mt. IP20. 12V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs / m. 5m reel. The led strip can be cut every 10cm.

Enhance your lighting with the set of 5 SD290/S12 LED Profiles, designed for perfect integration into plasterboard. Each 2 metre long profile is made of high quality aluminium with a matt cover, ideal for LED strips up to 12.4 mm wide. The ease of installation directly onto the post, with a filler gasket included, makes this set the ideal choice for refined and discreet lighting.

8+8watt/meter cob CCT led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This led strip has the possibility of adjusting the color temperature from warm light (2700K) to cold light (6500K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under wall units, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux from 640 to 1440 lm/m. IP20. 24V power supply. 5m reel. The led strip can be cut every 5cm.

14 watt/meter RGBIC digital cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This LED strip is digital, you will have the possibility to adjust the color of the light to your liking with the 358 color games available on the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 350lm/mt. IP20. 24V power supply. 5m reel. The LED strip can be cut every 10cm.

2 meter concealed external corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.

14.4 watt per meter RGB-White led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60Led. RGB LED strip with double light function and two colors to choose between warm light (3000K) and natural light (4000K). 5m reel. Divisible by the meter. Led strip with double function, RGB and white, ideal to be used to create plays of light or atmosphere in residential and commercial environments.