Clips For 220V LED Strips

Aluminum corner profile kit for LED 2m, 2000×15.8×15.8mm. Ideal for the proper installation of LED strips, thanks to it facilitates the cleaning and durability of the product. It is used to make the outline of rooms, under wall unit or in the veils to make the most of the light of the led strip. Unique kit including 2 meters of aluminum angle profile, 2 meters of cover, 2 caps and 2 clips.

Discover the SD290.T T Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

2 meter concealed external corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.

Remote control for controller to adjust the brightness of a high performance remote control LED strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). 50 degrees of brightness. LED strip and profile not included. Up to 4 zones available.

The remote control does not work without the compatible receiver.

By purchasing this product you will only receive the remote control, to also purchase the compatible receiver visit this LINK.

The high brightness and 4200 lumens per meter 30watt / meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 4200lm / mt. IP20. 24V power supply. 168 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 4.2cm.

This minimal LED lamp combines design and functionality. The dimensions vary from 5 to 20 meters, so the lamp can be positioned in almost any environment.

The LED strip and power supply are included, so it is not necessary to purchase them separately.

9,6watt/meter led strip. Ideal for use under the wall unit or in the recessed strips as courtesy lighting. 120° light beam. Luminous flux of 720lm/mt. IP20. 24V power supply. 120 LEDs per meter, type of LED: 3528 SMD. 5m reel. The 9,6w/m led strip can be cut every 5cm.

15watt/meter colored monochromatic cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under cabinet, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180 ° light opening. Luminous flux of 1350-1500 lm/mt. IP20. 24V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs/m. 5m reel. The led strip can be cut every 10cm.

15watt/meter monochromatic 5m COB LED strip with direct connection at 24V.

The COB led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led.

Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K).

Suitable for any type of application such as the lighting of residential or work environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flowerbeds.

Dimmable LED strip. 180° light beam opening. Luminous flux of 1450-1500-1500lm/m. IP65. 24V power supply. 528 LEDs per meter. 5m reel. The LED strip can be cut every 4.5cm.

The 12watt/meter led strip. This is the most commonly used led strip because of its brightness and versatility. Suitable for being applied under and over hanging to achieve a direct or indirect light effect, it is used extensively in furniture stores, clothing stores, veils, bars and anywhere linear light is needed. Light beam at 120° light aperture. Luminous flux 1699lm/mt. IP20. 24V power supply. 140 leds per meter. 5m coil. The led strip can be cut every 5cm, which would be every 7 LEDs.

15watt/meter colored monochromatic 5m cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under cabinet, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180 ° light opening. Luminous flux of 1300-1500 lm / mt. IP20. 12V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs / m. 5m reel. The led strip can be cut every 10cm.

Linear aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is under the cabinet, inside veils, inside wardrobes and walk-in wardrobes or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.

Monochromatic controller to adjust the brightness of a high-performance remote control LED strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). It has memory function and 50 degrees of brightness. LED strip and profile not included. Up to 4 receivers can be installed and controlled with a single remote control.

Without the Compatible remote control the receiver does not work.

By purchasing this item you will only receive the receiver without the remote control, which must be purchased separately. You can find it at this LINK.

Discover our selection of professional LED strips, ideal for best illuminating food counters in the gastronomic and commercial sectors. Each activity requires specific lighting and our specialized products ensure the best performance.

Our professional strips enhance the colors of foods, making them more inviting and realistic. You will find LED strips suitable for every type of refrigerated counter: from meat to fish to cured meats, from bread to cheeses, up to fruit and vegetables.

Entrust your professional lighting to our specialized LED strips and guarantee a welcoming and inviting environment for your customers.

Junction connector for 220V LED strips.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028