2m flat aluminum profile kit for LED strips L2000x17.4x7mm

The 25watt/meter high brightness and 3600 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 3600lm/mt. IP20. 24V power supply. 140 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 5cm.

The 8watt/meter LED strips. It is the most commonly used LED strip, due to its brightness and versatility. Suitable for application under and above wall units to obtain a direct or indirect light effect, it is used extensively in furniture factories, clothing stores, veils, bars and anywhere linear light is needed. 120° light beam opening. Luminous flux 1093lm/mt. IP20. 24V power supply. 70 LEDs per meter. 5m reel. The LED strip can be cut every 10cm, which would be every 7 LEDs.

Led strip 20watt/mt, ideal for the main lighting of rooms, shops or supermarkets. Very bright, with closely spaced LEDs that create a single strip of light without dots. 120 ° light beam. Luminous flux 1440lm / mt. IP20. 24V power supply. 240led per meter, type of led 3528SMD. 5m reel. Cut every 25mm.

14 watt/meter RGBIC digital cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This LED strip is digital, you will have the possibility to adjust the color of the light to your liking with the 358 color games available on the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 350lm/mt. IP20. 24V power supply. 5m reel. The LED strip can be cut every 10cm.

Discover the SD290.L L Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

Discover our selection of professional LED strips, ideal for best illuminating food counters in the gastronomic and commercial sectors. Each activity requires specific lighting and our specialized products ensure the best performance.

Our professional strips enhance the colors of foods, making them more inviting and realistic. You will find LED strips suitable for every type of refrigerated counter: from meat to fish to cured meats, from bread to cheeses, up to fruit and vegetables.

Entrust your professional lighting to our specialized LED strips and guarantee a welcoming and inviting environment for your customers.

Linear aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is under the cabinet, inside veils, inside wardrobes and walk-in wardrobes or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.

Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy.

The 20watt/meter high brightness and 2900 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2900lm/mt. IP20. 24V power supply. 112 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 6.5cm.

Led strip cob milky 20m monochromatic colored 14watt/meter with direct connection to 220V. The Cob Milky led strip is a new model of the most beautiful led strip as a finishing touch, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1080-1130-1230 lm/m. IP65. 220V power supply. 432 LEDs per metre. 20m reel. The LED strip can be cut every 16.6cm.

Junction connector for 220V LED strips.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

Closing cap for 220V LED strips.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

Aluminum corner profile kit for LED 2m, 2000×15.8×15.8mm. Ideal for the proper installation of LED strips, thanks to it facilitates the cleaning and durability of the product. It is used to make the outline of rooms, under wall unit or in the veils to make the most of the light of the led strip. Unique kit including 2 meters of aluminum angle profile, 2 meters of cover, 2 caps and 2 clips.

Discover the SD290.X X Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

2 meter retractable angular aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate in a corner and is subsequently shaved flush. Ideal profile for creating design light corners. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.

Minimum purchasable quantity: 2 bars.