Dimmable LED Power Supply 12V 200W Ultra Thin Transformer for LED Strip LED Driver
Dimmable LED Power Supply 12V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 12V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 24V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Protected power supply 24Volt. Power of 60W, 2.5A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected.
Dimmable LED Power Supply 24V 150W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Waterproof 12V power supply. Power of 60W, 5A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.
2 meter flat aluminum profile kit to be smoothed including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate and is subsequently trimmed flush. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum purchasable quantity: 2 bars.
2 meter concealed internal corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.
24V junction box power supply. Power of 100W, 4.5A. Indoor power supply, IP20. Ideal for powering led strips. Meanwell product with code LRS-100-24.
24V junction box power supply. Power of 75W, 3.2A. Indoor power supply, IP20. Ideal for led strips.
Meanwell power supply with code LRS-75-24.
Dimmable LED Power Supply 24V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
2 meter flat aluminum profile kit including opaque cover, 4 caps and 4 supports. Ideal for the correct installation of 220V LED strips.
Its main use is for heat dissipation on 220V strips.
Single kit including 2 meters of linear aluminum profile, 2 meters of opaque cover, 4 caps and 4 supports.
Exceptional price quality.
Dimmable LED Power Supply 12V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
24V protected power supply. Power of 60W, 2.08A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Closed power supply, protected from direct dust exposure, compared to grid junction box power supplies, it is good to be placed on furniture, shelves or kitchens.
Explore new lighting horizons with our 1m IP65 4000K 12V COB LED Strip Kit, enhanced with a Dimmer that offers total control over your lighting. The LED strip features 504 high-efficiency LEDs with a colour temperature of 4000K, providing natural, vivid light.
2 meter concealed external corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.
24V junction box power supply. Power of 35W, 1.5A. Indoor power supply, IP20. Ideal for powering led strips.
Meanwell power supply with code LRS-35-24.
RGB kit of 2 led strips of 50cm each. RGB light. Complete with power supply with 5 Volt USB output. Complete kit with remote control for color and brightness adjustment. They are applied to the back of the television as ambient lighting, thanks to the remote control it is possible to obtain all the color games you want. They stick directly to the back of the TV and are powered with a direct USB output to the TV.
Monochrome controller to adjust the brightness of a LED strip Touch dimmer to adjust the brightness of a led strip from 0% to 100% with a gradual adjustment. It fits inside the aluminum profile and connects to the led strip. Control the brightness of all products designed with constant voltage circuit (12V-24V). Led strip and profile not included. Finds its greatest application under the wall unit.from remote control with high performance. Controls the brightness of all products designed with the constant-voltage circuit (12V-24V). It has the function of memory and 50 degrees of brightness.
Dimmable LED Power Supply 24V 60W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Waterproof 12V power supply. Power of 24W, 2A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.
Discover the SD290.X X Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.
Switching power supply from 24V to 24W. Plug-in power supply to be installed with direct connection to the led strip. Ideal under cabinet, combinable with the touch dimmer. IP20. Led strip not included.
The high brightness and 4200 lumens per meter 30watt / meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 4200lm / mt. IP20. 24V power supply. 168 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 4.2cm.
24V protected power supply. Power of 20W, 0.83A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Snappy brand, code SNP20-24VF
14.4 watt per meter RGB-White led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60Led. RGB LED strip with double light function and two colors to choose between warm light (3000K) and natural light (4000K). 5m reel. Divisible by the meter. Led strip with double function, RGB and white, ideal to be used to create plays of light or atmosphere in residential and commercial environments.
Recessed aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is in plasterboard or wood, it is used to illuminate rooms, shops or interiors of furniture or walk-in closets. Single kit including 2 meters of recessed aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
Discover the SD290.T T Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.
Discover the SD290.L L Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.
Remote control to remotely control the Cob CCT led strips in 24V.
Compatible with 8+8W/MT 24V 5m COB IP20 led strip - CCT - 2700K-6500K.
Remote control to remotely control the Cob Digital RGBIC led strips in 24V.
Compatible with the IP20 5m Dynamic RGBIC 14W/MT 24V COB led strip.
Linear aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is under the cabinet, inside veils, inside wardrobes and walk-in wardrobes or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
Angular aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. It is used to outline the rooms, under the wall unit or in the veils to make the most of the light from the LED strip. Single kit including 2 meters of aluminum corner profile, 2 meters of satin cover, 2 caps and 2 clips.
The 25watt/meter high brightness and 3600 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 3600lm/mt. IP20. 24V power supply. 140 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 5cm.
Waterproof 12V power supply. Power of 12W, 1A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.
14.4 watt per meter RGB led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60LED. 5m reel. Divisible by every meter. Led strip ideal for creating plays of light or atmosphere. It is used a lot in houses and apartments or in the commercial field in shops or exhibitions. RGB led strip also used a lot in hotels and accommodation facilities.
Led strip 20watt/mt, ideal for the main lighting of rooms, shops or supermarkets. Very bright, with closely spaced LEDs that create a single strip of light without dots. 120 ° light beam. Luminous flux 1440lm / mt. IP20. 24V power supply. 240led per meter, type of led 3528SMD. 5m reel. Cut every 25mm.
Plug power cable for 220 volt led strips.
Only compatible with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027, 927028, 927019, 927029, 927031, 927033, 927034 and 927035.
The 20watt/meter high brightness and 2900 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2900lm/mt. IP20. 24V power supply. 112 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 6.5cm.
90° angular connector for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
The high brightness 15watt/meter led strip, 2100 lumens per meter. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2100lm/mt. IP20. 24V power supply. 84 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 8.5cm.