50ml tube Sealant
Sealant 50ml tube.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
Sealant 50ml tube.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
Remote control to remotely control the Cob CCT led strips in 24V.
Compatible with 8+8W/MT 24V 5m COB IP20 led strip - CCT - 2700K-6500K.
Remote control to remotely control the Cob Digital RGBIC led strips in 24V.
Compatible with the IP20 5m Dynamic RGBIC 14W/MT 24V COB led strip.
Plug power cable for 220 volt led strips.
Only compatible with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027, 927028, 927019, 927029, 927031, 927033, 927034 and 927035.
Junction connector for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
2 meter flat aluminum profile kit including opaque cover, 4 caps and 4 supports. Ideal for the correct installation of 220V LED strips.
Its main use is for heat dissipation on 220V strips.
Single kit including 2 meters of linear aluminum profile, 2 meters of opaque cover, 4 caps and 4 supports.
Exceptional price quality.
Guided, quick and safe connection.
Length: 20cm (connector included)
Compatible with Alcapower LED strips part numbers 927023, 927024, 927025, 927026, 927027, 927028, 927019, 927029, 927031, 927033, 927034 and 927035.
Switching power supply from 24V to 24W. Plug-in power supply to be installed with direct connection to the led strip. Ideal under cabinet, combinable with the touch dimmer. IP20. Led strip not included.
Waterproof 12V power supply. Power of 12W, 1A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.
Waterproof 12V power supply. Power of 24W, 2A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.
Waterproof 12V power supply. Power of 60W, 5A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.
Angular aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. It is used to outline the rooms, under the wall unit or in the veils to make the most of the light from the LED strip. Single kit including 2 meters of aluminum corner profile, 2 meters of satin cover, 2 caps and 2 clips.
Recessed aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is in plasterboard or wood, it is used to illuminate rooms, shops or interiors of furniture or walk-in closets. Single kit including 2 meters of recessed aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
Linear aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is under the cabinet, inside veils, inside wardrobes and walk-in wardrobes or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
Monochromatic controller to adjust the brightness of a high performance remote control led strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). It has memory function and 50 degrees of brightness. Led strip and profile not included. Up to 4 zones available. It is supplied with a single receiver, valid for one zone, to divide it into several zones please contact: ordini@sololed.it.
Controller with remote control for RGB led strip to adjust the brightness of a high performance remote control led strip. Control the brightness of all products designed with constant voltage circuit (12V-24V). It has memory function and 50 degrees of brightness. Led strip not included.
RGB-WHITE controller to adjust the brightness of a LED strip from remote control with high performance. Controls the brightness of all products designed with the constant-voltage circuit (12V-24V). It has the function of memory and 50 degrees of brightness.
Recessed wall touch controller for regulating dimmable LED products. It is mainly used to adjust the brightness of a 12-volt and 24-volt LED strip from a high-performance remote control. It has memory function and many brightness variations. It couples with a wireless system to a radio frequency dimmer that allows you to adjust the intensity of the dimmable LED products. Recessed touch controller with a modern style. Dimensions: 87x87mm for the bezel and 33mm for the recess.
24V protected power supply. Power of 60W, 2.08A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Closed power supply, protected from direct dust exposure, compared to grid junction box power supplies, it is good to be placed on furniture, shelves or kitchens.
RGB kit of 2 led strips of 50cm each. RGB light. Complete with power supply with 5 Volt USB output. Complete kit with remote control for color and brightness adjustment. They are applied to the back of the television as ambient lighting, thanks to the remote control it is possible to obtain all the color games you want. They stick directly to the back of the TV and are powered with a direct USB output to the TV.
This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 100W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.
Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.
Power supply LED driver 24Vdc 100W 4160mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V</ p>
This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 150W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.
Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.
Power supply LED driver 24Vdc 150W 6250mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V
This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 75W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.
Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.
LED power supply 24Vdc 75W 3120mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V</p >
24V junction box power supply. Power of 100W, 4.5A. Indoor power supply, IP20. Ideal for powering led strips. Meanwell product with code LRS-100-24.
24V junction box power supply. Power of 150W, 6.5A. Indoor power supply, IP20. Ideal for led strips.
Meanwell power supply code LRS-150-24.
24V junction box power supply. Power of 35W, 1.5A. Indoor power supply, IP20. Ideal for powering led strips.
Meanwell power supply with code LRS-35-24.
24V junction box power supply. Power of 75W, 3.2A. Indoor power supply, IP20. Ideal for led strips.
Meanwell power supply with code LRS-75-24.
Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy.
Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 10mm profile. Model Carrara M by Gea Luce.
Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 20mm profile or two 10mm strips. Model Carrara G by Gea Luce.
2 meter flat aluminum profile kit to be smoothed including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate and is subsequently trimmed flush. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum purchasable quantity: 2 bars.
2 meter concealed external corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.
2 meter concealed internal corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.
24V junction box power supply. Power of 200W, 8.4A. Indoor power supply, IP20. Ideal for high power led strips or long stretches of strips. Meanwell power supply with code RSP-200-24.
Dimmable LED Power Supply 24V 60W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 24V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 24V 150W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 24V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 24V 300W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Dimmable LED Power Supply 12V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.