Clips For 220V LED Strips
Clips for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
Clips for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
Closing cap for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
Junction connector for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
2 meter flat aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its main use is under cabinets, inside veils, inside wardrobes and walk-in closets or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional quality-price.
Guided, quick and safe connection.
Length: 20cm (connector included)
Compatible with Alcapower LED strips part numbers 927023, 927024, 927025, 927026, 927027, 927028, 927019, 927029, 927031, 927033, 927034 and 927035.
Aluminum corner profile kit for LED 2m, 2000×15.8×15.8mm. Ideal for the proper installation of LED strips, thanks to it facilitates the cleaning and durability of the product. It is used to make the outline of rooms, under wall unit or in the veils to make the most of the light of the led strip. Unique kit including 2 meters of aluminum angle profile, 2 meters of cover, 2 caps and 2 clips.
Sealant 50ml tube.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
90° angular connector for 220V LED strips.
Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028
Plug power cable for 220 volt led strips.
Only compatible with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027, 927028, 927019, 927029, 927031, 927033, 927034 and 927035.
Linear aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is under the cabinet, inside veils, inside wardrobes and walk-in wardrobes or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
Angular aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. It is used to outline the rooms, under the wall unit or in the veils to make the most of the light from the LED strip. Single kit including 2 meters of aluminum corner profile, 2 meters of satin cover, 2 caps and 2 clips.
Remote control to remotely control the Cob Digital RGBIC led strips in 24V.
Compatible with the IP20 5m Dynamic RGBIC 14W/MT 24V COB led strip.
Monochromatic controller to adjust the brightness of a high-performance remote control LED strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). It has memory function and 50 degrees of brightness. LED strip and profile not included. Up to 4 receivers can be installed and controlled with a single remote control.
Without the Compatible remote control the receiver does not work.
By purchasing this item you will only receive the receiver without the remote control, which must be purchased separately. You can find it at this LINK.
Remote control for controller to adjust the brightness of a high performance remote control LED strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). 50 degrees of brightness. LED strip and profile not included. Up to 4 zones available.
The remote control does not work without the compatible receiver.
By purchasing this product you will only receive the remote control, to also purchase the compatible receiver visit this LINK.
Discover the SD290.T T Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.
Discover the SD290.L L Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.
Remote control to remotely control the Cob CCT led strips in 24V.
Compatible with 8+8W/MT 24V 5m COB IP20 led strip - CCT - 2700K-6500K.
Recessed aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is in plasterboard or wood, it is used to illuminate rooms, shops or interiors of furniture or walk-in closets. Single kit including 2 meters of recessed aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
Monochrome controller to adjust the brightness of a LED strip Touch dimmer to adjust the brightness of a led strip from 0% to 100% with a gradual adjustment. It fits inside the aluminum profile and connects to the led strip. Control the brightness of all products designed with constant voltage circuit (12V-24V). Led strip and profile not included. Finds its greatest application under the wall unit.from remote control with high performance. Controls the brightness of all products designed with the constant-voltage circuit (12V-24V). It has the function of memory and 50 degrees of brightness.
Discover the SD290.X X Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.
2 meter concealed external corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.
2 meter flat aluminum profile kit including opaque cover, 4 caps and 4 supports. Ideal for the correct installation of 220V LED strips.
Its main use is for heat dissipation on 220V strips.
Single kit including 2 meters of linear aluminum profile, 2 meters of opaque cover, 4 caps and 4 supports.
Exceptional price quality.
2 meter concealed internal corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.
2 meter flat aluminum profile kit to be smoothed including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate and is subsequently trimmed flush. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum purchasable quantity: 2 bars.
RGB-WHITE controller to adjust the brightness of a LED strip from remote control with high performance. Controls the brightness of all products designed with the constant-voltage circuit (12V-24V). It has the function of memory and 50 degrees of brightness.
Controller with remote control for RGB led strip to adjust the brightness of a high performance remote control led strip. Control the brightness of all products designed with constant voltage circuit (12V-24V). It has memory function and 50 degrees of brightness. Led strip not included.
Recessed wall touch controller for regulating dimmable LED products. It is mainly used to adjust the brightness of a 12-volt and 24-volt LED strip from a high-performance remote control. It has memory function and many brightness variations. It couples with a wireless system to a radio frequency dimmer that allows you to adjust the intensity of the dimmable LED products. Recessed touch controller with a modern style. Dimensions: 87x87mm for the bezel and 33mm for the recess.
LED controller for regulating common anode (positive pole) RGB LED strips and white light LED strips with working voltage between 12V DC and 24V DC.
This controller is compatible with all Alcapower RGB, RGB-W and monochrome LED strips.
Allows configuration with various Smart control apps, such as Tuya, Alexa and Google Home.
You will be able to control all the functions of the LED strips remotely.
Led strip cob 5m monochromatic colored 14watt/meter with direct connection to 220V. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1200-1300-1350 lm/m. IP65. 220V power supply. 432 LEDs per metre. 5m reel. The LED strip can be cut every 16.6cm.
Led strip cob milky 5m monochromatic colored 14watt/meter with direct connection to 220V. The Cob Milky led strip is a new model of the most beautiful led strip as a finishing touch, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1080-1130-1230 lm/m. IP65. 220V power supply. 432 LEDs per metre. 5m reel. The LED strip can be cut every 16.6cm.
Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy.
Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 10mm profile. Model Carrara M by Gea Luce.
Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 20mm profile or two 10mm strips. Model Carrara G by Gea Luce.
Enhance your lighting with the set of 5 SD290/S12 LED Profiles, designed for perfect integration into plasterboard. Each 2 metre long profile is made of high quality aluminium with a matt cover, ideal for LED strips up to 12.4 mm wide. The ease of installation directly onto the post, with a filler gasket included, makes this set the ideal choice for refined and discreet lighting.
Colored monochromatic 20m cob led strip 15watt/meter. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° light opening. Luminous flux of 1200-1350 lm/mt. IP65. 220V power supply. 60 LEDs per meter, number of LEDs: 432 LEDs / m. 20m reel. The led strip can be cut every 10cm.
Led strip cob milky 20m monochromatic colored 14watt/meter with direct connection to 220V. The Cob Milky led strip is a new model of the most beautiful led strip as a finishing touch, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1080-1130-1230 lm/m. IP65. 220V power supply. 432 LEDs per metre. 20m reel. The LED strip can be cut every 16.6cm.