Strips

2 meter retractable angular aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate in a corner and is subsequently shaved flush. Ideal profile for creating design light corners. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.

Minimum purchasable quantity: 2 bars.

Sealant 50ml tube.

Compatible only with Alcapower led strips codes 927023, 927024, 927025, 927026, 927027 and 927028

The 14.4watt/meter led strips. It is the most used led strip. Suitable to be applied under the wall unit, above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, in veils, in bars and in any place where linear light is required. Light beam at 120 ° of light opening. Luminous flux 1080lm / mt. IP20. 24V power supply. 60 leds per meter, type of led: 3014SMD. 5m reel. The led strip can be cut every 5cm.

Led strip cob milky 20m monochromatic colored 14watt/meter with direct connection to 220V. The Cob Milky led strip is a new model of the most beautiful led strip as a finishing touch, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1080-1130-1230 lm/m. IP65. 220V power supply. 432 LEDs per metre. 20m reel. The LED strip can be cut every 16.6cm.

Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy.

Led strip 20watt/mt, ideal for the main lighting of rooms, shops or supermarkets. Very bright, with closely spaced LEDs that create a single strip of light without dots. 120 ° light beam. Luminous flux 1440lm / mt. IP20. 24V power supply. 240led per meter, type of led 3528SMD. 5m reel. Cut every 25mm.

24V protected power supply. Power of 100W, 4.17A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Ideal to use in the veils or above the wall units thanks to its size, narrow and long.

Led strip cob milky 5m monochromatic colored 14watt/meter with direct connection to 220V. The Cob Milky led strip is a new model of the most beautiful led strip as a finishing touch, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as the lighting of residential or working environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flower beds. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 1080-1130-1230 lm/m. IP65. 220V power supply. 432 LEDs per metre. 5m reel. The LED strip can be cut every 16.6cm.

Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 10mm profile. Model Carrara M by Gea Luce.

24V junction box power supply. Power of 100W, 4.5A. Indoor power supply, IP20. Ideal for powering led strips. Meanwell product with code LRS-100-24.

Led Strip 25watt/meter. High power led strip, ideal for the main lighting of large rooms and environments. 120 ° light beam opening of the light. Luminous flux of 1840lm / mt. IP20. 24V power supply. 204 leds per meter, type of led: 3014SMD. 5m reel. Available in two shades of light: warm light (3000K) and natural light (4000K). The 25w / m led strip can be cut every 29mm.

Guided, quick and safe connection.

Length: 20cm (connector included)

Compatible with Alcapower LED strips part numbers 927023, 927024, 927025, 927026, 927027, 927028, 927019, 927029, 927031, 927033, 927034 and 927035.

Recessed aluminum profile with pre-assembled plasterboard to be smoothed 2 meters including two covers, one transparent and one satin and two caps. Ideal for obtaining cuts of light with a unique design. Its use is in plasterboard, in fact this profile is shaved like a normal sheet of plasterboard. Minimal and captivating design but at the same time modern and trendy. Strip to be inserted inside the maximum 20mm profile or two 10mm strips. Model Carrara G by Gea Luce.

14.4 watt per meter RGB led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60LED. 5m reel. Divisible by every meter. Led strip ideal for creating plays of light or atmosphere. It is used a lot in houses and apartments or in the commercial field in shops or exhibitions. RGB led strip also used a lot in hotels and accommodation facilities.

24V junction box power supply. Power of 150W, 6.5A. Indoor power supply, IP20. Ideal for led strips.

Meanwell power supply code LRS-150-24.

Aluminum corner profile kit for LED 2m, 2000×15.8×15.8mm. Ideal for the proper installation of LED strips, thanks to it facilitates the cleaning and durability of the product. It is used to make the outline of rooms, under wall unit or in the veils to make the most of the light of the led strip. Unique kit including 2 meters of aluminum angle profile, 2 meters of cover, 2 caps and 2 clips.

14.4 watt per meter RGB-White led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60Led. RGB LED strip with double light function and two colors to choose between warm light (3000K) and natural light (4000K). 5m reel. Divisible by the meter. Led strip with double function, RGB and white, ideal to be used to create plays of light or atmosphere in residential and commercial environments.

24V junction box power supply. Power of 200W, 8.4A. Indoor power supply, IP20. Ideal for high power led strips or long stretches of strips. Meanwell power supply with code RSP-200-24.

Discover the SD290.L L Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

15watt/meter colored monochromatic cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in four colors: blue, green, yellow and red. Suitable for particular applications, to create atmospheres of various kinds thanks to these colored monochromatic led strips. Light beam with 180° light opening. Variable luminous flux based on color. IP20. 24V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs / m. 5m reel. The led strip can be cut every 10cm.

24V protected power supply. Power of 60W, 2.08A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Closed power supply, protected from direct dust exposure, compared to grid junction box power supplies, it is good to be placed on furniture, shelves or kitchens.

Discover the SD290.X X Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

Dimmable LED Power Supply 24V 60W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

15watt/meter colored monochromatic cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under cabinet, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180 ° light opening. Luminous flux of 1350-1500 lm/mt. IP20. 24V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs/m. 5m reel. The led strip can be cut every 10cm.

Discover the SD290.T T Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

Dimmable LED Power Supply 24V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

8+8watt/meter cob CCT led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This led strip has the possibility of adjusting the color temperature from warm light (2700K) to cold light (6500K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under wall units, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux from 640 to 1440 lm/m. IP20. 24V power supply. 5m reel. The led strip can be cut every 5cm.

Enhance your lighting with the set of 5 SD290/S12 LED Profiles, designed for perfect integration into plasterboard. Each 2 metre long profile is made of high quality aluminium with a matt cover, ideal for LED strips up to 12.4 mm wide. The ease of installation directly onto the post, with a filler gasket included, makes this set the ideal choice for refined and discreet lighting.

Dimmable LED Power Supply 24V 150W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

14 watt/meter RGBIC digital cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This LED strip is digital, you will have the possibility to adjust the color of the light to your liking with the 358 color games available on the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Luminous flux of 350lm/mt. IP20. 24V power supply. 5m reel. The LED strip can be cut every 10cm.

2 meter flat aluminum profile kit including opaque cover, 4 caps and 4 supports. Ideal for the correct installation of 220V LED strips.

Its main use is for heat dissipation on 220V strips.

Single kit including 2 meters of linear aluminum profile, 2 meters of opaque cover, 4 caps and 4 supports.

Exceptional price quality.

Dimmable LED Power Supply 24V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

15 watt/meter RGB cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. This led strip is rgb, you will have the possibility to adjust the color of the light to your liking with the appropriate controller. Suitable for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180° opening of the light. Number of LEDs: 840 LEDs/m. IP20. 24V power supply. 5m reel. The led strip can be cut every 5cm.

Smartluce accessory, is a Wifi phase cut dimmer. This accessory is necessary to connect compatible Fabas Luce ceiling lights to smart devices such as Alexa or Google Home. The whole series of chandeliers and ceiling lights bearing the Smartluce logo can be adjusted through an app on the smartphone and with the Wifi connection.

2 meter flat aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its main use is under cabinets, inside veils, inside wardrobes and walk-in closets or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional quality-price.

Dimmable LED Power Supply 24V 300W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

The 12watt/meter led strip. This is the most commonly used led strip because of its brightness and versatility. Suitable for being applied under and over hanging to achieve a direct or indirect light effect, it is used extensively in furniture stores, clothing stores, veils, bars and anywhere linear light is needed. Light beam at 120° light aperture. Luminous flux 1699lm/mt. IP20. 24V power supply. 140 leds per meter. 5m coil. The led strip can be cut every 5cm, which would be every 7 LEDs.

Universal Smart Dimmer 220-240V AC. Can be used to turn on, turn off and dim: dimmable LED, CFL, incandescent and halogen lamps. Ideal for controlling lights in living rooms, apartments, hotels, hospitals, shops etc. Remote light control via Tablet and Smartphone: switching on, off and adjusting light intensity. Control via one or more buttons connected to the dimmer.

This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 75W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.

Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.

LED power supply 24Vdc 75W 3120mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V</p >