Power Supply 20W 24V Snappy
24V protected power supply. Power of 20W, 0.83A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Snappy brand, code SNP20-24VF
24V protected power supply. Power of 20W, 0.83A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Snappy brand, code SNP20-24VF
The high brightness 15watt/meter led strip, 2100 lumens per meter. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2100lm/mt. IP20. 24V power supply. 84 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 8.5cm.
Linear aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is under the cabinet, inside veils, inside wardrobes and walk-in wardrobes or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
Monochromatic controller to adjust the brightness of a high performance remote control led strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). It has memory function and 50 degrees of brightness. Led strip and profile not included. Up to 4 zones available. It is supplied with a single receiver, valid for one zone, to divide it into several zones please contact: ordini@sololed.it.
The 20watt/meter high brightness and 2900 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2900lm/mt. IP20. 24V power supply. 112 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 6.5cm.
Angular aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. It is used to outline the rooms, under the wall unit or in the veils to make the most of the light from the LED strip. Single kit including 2 meters of aluminum corner profile, 2 meters of satin cover, 2 caps and 2 clips.
24V junction box power supply. Power of 35W, 1.5A. Indoor power supply, IP20. Ideal for powering led strips.
Meanwell power supply with code LRS-35-24.
Controller with remote control for RGB led strip to adjust the brightness of a high performance remote control led strip. Control the brightness of all products designed with constant voltage circuit (12V-24V). It has memory function and 50 degrees of brightness. Led strip not included.
Dimmable LED Power Supply 12V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
The 25watt/meter high brightness and 3600 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 3600lm/mt. IP20. 24V power supply. 140 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 5cm.
Recessed aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is in plasterboard or wood, it is used to illuminate rooms, shops or interiors of furniture or walk-in closets. Single kit including 2 meters of recessed aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.
RGB-WHITE controller to adjust the brightness of a LED strip from remote control with high performance. Controls the brightness of all products designed with the constant-voltage circuit (12V-24V). It has the function of memory and 50 degrees of brightness.
Dimmable LED Power Supply 12V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
The high brightness and 4200 lumens per meter 30watt / meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 4200lm / mt. IP20. 24V power supply. 168 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 4.2cm.
Recessed wall touch controller for regulating dimmable LED products. It is mainly used to adjust the brightness of a 12-volt and 24-volt LED strip from a high-performance remote control. It has memory function and many brightness variations. It couples with a wireless system to a radio frequency dimmer that allows you to adjust the intensity of the dimmable LED products. Recessed touch controller with a modern style. Dimensions: 87x87mm for the bezel and 33mm for the recess.
Protected power supply 24Volt. Power of 60W, 2.5A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected.
2 meter flat aluminum profile kit to be smoothed including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate and is subsequently trimmed flush. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum purchasable quantity: 2 bars.
4.8 watt / meter led strip. Low intensity LED strip, ideal to be used as a courtesy light, passing light or for plays of light. 120 ° light beam as light opening. Luminous flux of 360lm / mt. IP20. 24V power supply. 60 LEDs per meter, type of LED: 3528SMD. 5m reel. The led strip is available in two color shades: warm light (3000K) and natural light (4000K). The 4.8 watt / meter led strip can be cut every 10cm.
2 meter concealed internal corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.
9,6watt/meter led strip. Ideal for use under the wall unit or in the recessed strips as courtesy lighting. 120° light beam. Luminous flux of 720lm/mt. IP20. 24V power supply. 120 LEDs per meter, type of LED: 3528 SMD. 5m reel. The 9,6w/m led strip can be cut every 5cm.
24V junction box power supply. Power of 75W, 3.2A. Indoor power supply, IP20. Ideal for led strips.
Meanwell power supply with code LRS-75-24.
2 meter concealed external corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.
The 14.4watt/meter led strips. It is the most used led strip. Suitable to be applied under the wall unit, above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, in veils, in bars and in any place where linear light is required. Light beam at 120 ° of light opening. Luminous flux 1080lm / mt. IP20. 24V power supply. 60 leds per meter, type of led: 3014SMD. 5m reel. The led strip can be cut every 5cm.
Led strip 20watt/mt, ideal for the main lighting of rooms, shops or supermarkets. Very bright, with closely spaced LEDs that create a single strip of light without dots. 120 ° light beam. Luminous flux 1440lm / mt. IP20. 24V power supply. 240led per meter, type of led 3528SMD. 5m reel. Cut every 25mm.
24V protected power supply. Power of 100W, 4.17A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Ideal to use in the veils or above the wall units thanks to its size, narrow and long.
24V junction box power supply. Power of 100W, 4.5A. Indoor power supply, IP20. Ideal for powering led strips. Meanwell product with code LRS-100-24.
Led Strip 25watt/meter. High power led strip, ideal for the main lighting of large rooms and environments. 120 ° light beam opening of the light. Luminous flux of 1840lm / mt. IP20. 24V power supply. 204 leds per meter, type of led: 3014SMD. 5m reel. Available in two shades of light: warm light (3000K) and natural light (4000K). The 25w / m led strip can be cut every 29mm.
14.4 watt per meter RGB led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60LED. 5m reel. Divisible by every meter. Led strip ideal for creating plays of light or atmosphere. It is used a lot in houses and apartments or in the commercial field in shops or exhibitions. RGB led strip also used a lot in hotels and accommodation facilities.
24V junction box power supply. Power of 150W, 6.5A. Indoor power supply, IP20. Ideal for led strips.
Meanwell power supply code LRS-150-24.
Aluminum corner profile kit for LED 2m, 2000×15.8×15.8mm. Ideal for the proper installation of LED strips, thanks to it facilitates the cleaning and durability of the product. It is used to make the outline of rooms, under wall unit or in the veils to make the most of the light of the led strip. Unique kit including 2 meters of aluminum angle profile, 2 meters of cover, 2 caps and 2 clips.
14.4 watt per meter RGB-White led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60Led. RGB LED strip with double light function and two colors to choose between warm light (3000K) and natural light (4000K). 5m reel. Divisible by the meter. Led strip with double function, RGB and white, ideal to be used to create plays of light or atmosphere in residential and commercial environments.
24V junction box power supply. Power of 200W, 8.4A. Indoor power supply, IP20. Ideal for high power led strips or long stretches of strips. Meanwell power supply with code RSP-200-24.
Discover the SD290.L L Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.
24V protected power supply. Power of 60W, 2.08A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Closed power supply, protected from direct dust exposure, compared to grid junction box power supplies, it is good to be placed on furniture, shelves or kitchens.
Discover the SD290.X X Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.
Dimmable LED Power Supply 24V 60W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Discover the SD290.T T Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.
Dimmable LED Power Supply 24V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.
Enhance your lighting with the set of 5 SD290/S12 LED Profiles, designed for perfect integration into plasterboard. Each 2 metre long profile is made of high quality aluminium with a matt cover, ideal for LED strips up to 12.4 mm wide. The ease of installation directly onto the post, with a filler gasket included, makes this set the ideal choice for refined and discreet lighting.
Dimmable LED Power Supply 24V 150W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.