Strips

2 meter flat aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its main use is under cabinets, inside veils, inside wardrobes and walk-in closets or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional quality-price.

Aluminum corner profile kit for LED 2m, 2000×15.8×15.8mm. Ideal for the proper installation of LED strips, thanks to it facilitates the cleaning and durability of the product. It is used to make the outline of rooms, under wall unit or in the veils to make the most of the light of the led strip. Unique kit including 2 meters of aluminum angle profile, 2 meters of cover, 2 caps and 2 clips.

Waterproof 12V power supply. Power of 12W, 1A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.

24V protected power supply. Power of 20W, 0.83A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Snappy brand, code SNP20-24VF

Linear aluminum profile kit including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is under the cabinet, inside veils, inside wardrobes and walk-in wardrobes or in shops to better illuminate the shelves. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.

Angular aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. It is used to outline the rooms, under the wall unit or in the veils to make the most of the light from the LED strip. Single kit including 2 meters of aluminum corner profile, 2 meters of satin cover, 2 caps and 2 clips.

Remote control to remotely control the Cob Digital RGBIC led strips in 24V.

Compatible with the IP20 5m Dynamic RGBIC 14W/MT 24V COB led strip.

Monochromatic controller to adjust the brightness of a high-performance remote control LED strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). It has memory function and 50 degrees of brightness. LED strip and profile not included. Up to 4 receivers can be installed and controlled with a single remote control.

Without the Compatible remote control the receiver does not work.

By purchasing this item you will only receive the receiver without the remote control, which must be purchased separately. You can find it at this LINK.

Remote control for controller to adjust the brightness of a high performance remote control LED strip. Control the brightness of all products designed with constant voltage circuit (12Volt-24Volt). 50 degrees of brightness. LED strip and profile not included. Up to 4 zones available.

The remote control does not work without the compatible receiver.

By purchasing this product you will only receive the remote control, to also purchase the compatible receiver visit this LINK.

Discover the SD290.T T Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

Discover the SD290.L L Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

Recessed aluminum profile kit 2 meter including satin cover, 2 caps and 2 clips. Ideal for the correct installation of LED strips, thanks to it, cleaning and product life are facilitated. Its main use is in plasterboard or wood, it is used to illuminate rooms, shops or interiors of furniture or walk-in closets. Single kit including 2 meters of recessed aluminum profile, 2 meters of satin cover, 2 caps and 2 clips. Exceptional price quality.

Switching power supply from 24V to 24W. Plug-in power supply to be installed with direct connection to the led strip. Ideal under cabinet, combinable with the touch dimmer. IP20. Led strip not included.

This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 75W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.

Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.

LED power supply 24Vdc 75W 3120mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V</p >

Discover the SD290.X X Profile, the ideal solution for discreetly integrating LED strips into your plasterboard. Made of high-quality aluminium, this profile offers a matt cover for optimal light transmission while minimising the dotted effect of LEDs. With dimensions suitable for strips up to 12.4 mm wide, it is easy to install directly on the mullion, thanks to the included grout gasket.

Waterproof 12V power supply. Power of 24W, 2A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.

Dimmable LED Power Supply 24V 60W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

2 meter concealed external corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.

24V junction box power supply. Power of 35W, 1.5A. Indoor power supply, IP20. Ideal for powering led strips.

Meanwell power supply with code LRS-35-24.

24V protected power supply. Power of 60W, 2.08A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Closed power supply, protected from direct dust exposure, compared to grid junction box power supplies, it is good to be placed on furniture, shelves or kitchens.

Dimmable LED Power Supply 12V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

2 meter flat aluminum profile kit including opaque cover, 4 caps and 4 supports. Ideal for the correct installation of 220V LED strips.

Its main use is for heat dissipation on 220V strips.

Single kit including 2 meters of linear aluminum profile, 2 meters of opaque cover, 4 caps and 4 supports.

Exceptional price quality.

Dimmable LED Power Supply 24V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

24V junction box power supply. Power of 100W, 4.5A. Indoor power supply, IP20. Ideal for powering led strips. Meanwell product with code LRS-100-24.

2 meter concealed internal corner aluminum profile kit including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the durability of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard sheet in a corner and is then smoothed flush. Ideal profile for creating designer light angles. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.
Minimum quantity that can be purchased: 2 bars.

2 meter flat aluminum profile kit to be smoothed including satin cover and 2 caps. Ideal for the correct installation of LED strips, thanks to it it facilitates cleaning and the life of the product. Its use is in plasterboard, in fact this profile is screwed to the plasterboard plate and is subsequently trimmed flush. Single kit including 2 meters of normal flat aluminum profile, 2 meters of satin cover, 2 caps.

Minimum purchasable quantity: 2 bars.

Dimmable LED Power Supply 24V 150W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

Waterproof 12V power supply. Power of 60W, 5A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.

Protected power supply 24Volt. Power of 60W, 2.5A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected.

Dimmable LED Power Supply 24V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

Dimmable LED Power Supply 12V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

Universal Smart Dimmer 220-240V AC. Can be used to turn on, turn off and dim: dimmable LED, CFL, incandescent and halogen lamps. Ideal for controlling lights in living rooms, apartments, hotels, hospitals, shops etc. Remote light control via Tablet and Smartphone: switching on, off and adjusting light intensity. Control via one or more buttons connected to the dimmer.

24V junction box power supply. Power of 150W, 6.5A. Indoor power supply, IP20. Ideal for led strips.

Meanwell power supply code LRS-150-24.

Dimmable LED Power Supply 24V 300W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

24V protected power supply. Power of 100W, 4.17A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Ideal to use in the veils or above the wall units thanks to its size, narrow and long.