Strips

4.8 watt / meter led strip. Low intensity LED strip, ideal to be used as a courtesy light, passing light or for plays of light. 120 ° light beam as light opening. Luminous flux of 360lm / mt. IP20. 24V power supply. 60 LEDs per meter, type of LED: 3528SMD. 5m reel. The led strip is available in two color shades: warm light (3000K) and natural light (4000K). The 4.8 watt / meter led strip can be cut every 10cm.

9,6watt/meter led strip. Ideal for use under the wall unit or in the recessed strips as courtesy lighting. 120° light beam. Luminous flux of 720lm/mt. IP20. 24V power supply. 120 LEDs per meter, type of LED: 3528 SMD. 5m reel. The 9,6w/m led strip can be cut every 5cm.

The 14.4watt/meter led strips. It is the most used led strip. Suitable to be applied under the wall unit, above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, in veils, in bars and in any place where linear light is required. Light beam at 120 ° of light opening. Luminous flux 1080lm / mt. IP20. 24V power supply. 60 leds per meter, type of led: 3014SMD. 5m reel. The led strip can be cut every 5cm.

The high brightness 15watt/meter led strip, 2100 lumens per meter. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2100lm/mt. IP20. 24V power supply. 84 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 8.5cm.

The 20watt/meter high brightness and 2900 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 2900lm/mt. IP20. 24V power supply. 112 leds per meter, type of led: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 6.5cm.

Led strip 20watt/mt, ideal for the main lighting of rooms, shops or supermarkets. Very bright, with closely spaced LEDs that create a single strip of light without dots. 120 ° light beam. Luminous flux 1440lm / mt. IP20. 24V power supply. 240led per meter, type of led 3528SMD. 5m reel. Cut every 25mm.

14.4 watt per meter RGB led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60LED. 5m reel. Divisible by every meter. Led strip ideal for creating plays of light or atmosphere. It is used a lot in houses and apartments or in the commercial field in shops or exhibitions. RGB led strip also used a lot in hotels and accommodation facilities.

Waterproof 12V power supply. Power of 12W, 1A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.

The 25watt/meter high brightness and 3600 lumens per meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 3600lm/mt. IP20. 24V power supply. 140 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 5cm.

24V protected power supply. Power of 20W, 0.83A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Snappy brand, code SNP20-24VF

14.4 watt per meter RGB-White led strip. 120 ° light beam. Luminous flux 560lm / mt. IP20. 24V power supply. 60Led. RGB LED strip with double light function and two colors to choose between warm light (3000K) and natural light (4000K). 5m reel. Divisible by the meter. Led strip with double function, RGB and white, ideal to be used to create plays of light or atmosphere in residential and commercial environments.

The high brightness and 4200 lumens per meter 30watt / meter led strip is a very powerful and highly demanded strip for its brightness. Suitable to be applied above the wall unit to obtain an indirect light effect, in furniture factories, clothing stores, veils, bars and in any place where light is required linearly distributed with high power. Light beam at 120 ° of light opening. Luminous flux 4200lm / mt. IP20. 24V power supply. 168 LEDs per meter, type of LED: 2835SMD. 5m reel. CRI> 90. The led strip can be cut every 4.2cm.

Switching power supply from 24V to 24W. Plug-in power supply to be installed with direct connection to the led strip. Ideal under cabinet, combinable with the touch dimmer. IP20. Led strip not included.

This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 150W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.

Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.

Power supply LED driver 24Vdc 150W 6250mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V

This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 100W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.

Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.

Power supply LED driver 24Vdc 100W 4160mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V</ p>

This power supply or driver for LED strips is from the LEF LIGHTING brand and used for LED strips with a maximum power of 75W. With this power supply you can make your LED strips dimmable and therefore adjust the brightness via the switch, without a remote control.

Only the power supply is included in the package. To find out which products and LED strips are compatible with this model, take a look in the "Related Products" at the bottom of this page.

LED power supply 24Vdc 75W 3120mA constant voltage IP20 dimmable DALI/PUSH/0-10V/1-10V</p >

Waterproof 12V power supply. Power of 24W, 2A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.

Dimmable LED Power Supply 24V 60W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

24V junction box power supply. Power of 35W, 1.5A. Indoor power supply, IP20. Ideal for powering led strips.

Meanwell power supply with code LRS-35-24.

The 5watt/meter LED strips. It is a LED strip used in environments where low brightness or presence light is required. Suitable for application under and above wall units to obtain a direct or indirect light effect. 120° light beam opening. Luminous flux 610lm/m. IP20. 24V power supply. 60 LEDs per meter. 5m reel. The LED strip can be cut every 10cm, which would be every 6 LEDs.

The 8watt/meter LED strips. It is the most commonly used LED strip, due to its brightness and versatility. Suitable for application under and above wall units to obtain a direct or indirect light effect, it is used extensively in furniture factories, clothing stores, veils, bars and anywhere linear light is needed. 120° light beam opening. Luminous flux 1093lm/mt. IP20. 24V power supply. 70 LEDs per meter. 5m reel. The LED strip can be cut every 10cm, which would be every 7 LEDs.

24V protected power supply. Power of 60W, 2.08A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Closed power supply, protected from direct dust exposure, compared to grid junction box power supplies, it is good to be placed on furniture, shelves or kitchens.

Dimmable LED Power Supply 12V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

Dimmable LED Power Supply 24V 100W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

The 12watt/meter led strip. This is the most commonly used led strip because of its brightness and versatility. Suitable for being applied under and over hanging to achieve a direct or indirect light effect, it is used extensively in furniture stores, clothing stores, veils, bars and anywhere linear light is needed. Light beam at 120° light aperture. Luminous flux 1699lm/mt. IP20. 24V power supply. 140 leds per meter. 5m coil. The led strip can be cut every 5cm, which would be every 7 LEDs.

24V junction box power supply. Power of 100W, 4.5A. Indoor power supply, IP20. Ideal for powering led strips. Meanwell product with code LRS-100-24.

Dimmable LED Power Supply 24V 150W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

Waterproof 12V power supply. Power of 60W, 5A and output cables. IP67 power supply, water resistant. Ideal for recessed floor led spotlights, GU5.3 spotlights or led strips.

Protected power supply 24Volt. Power of 60W, 2.5A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected.

The 20watt/meter LED strips. It is a LED strip that is highly sought after for its brightness and versatility. Suitable for application under and above wall units to obtain a direct or indirect light effect, it is used extensively in furniture factories, clothing stores, veils, bars and anywhere linear light is needed. 120° light beam opening. Luminous flux 2682lm/mt. IP20. 24V power supply. 238 LEDs per meter. 5m reel. The LED strip can be cut every 3cm, every 7 LEDs.

Dimmable LED Power Supply 24V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

Dimmable LED Power Supply 12V 200W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

Universal Smart Dimmer 220-240V AC. Can be used to turn on, turn off and dim: dimmable LED, CFL, incandescent and halogen lamps. Ideal for controlling lights in living rooms, apartments, hotels, hospitals, shops etc. Remote light control via Tablet and Smartphone: switching on, off and adjusting light intensity. Control via one or more buttons connected to the dimmer.

24V junction box power supply. Power of 150W, 6.5A. Indoor power supply, IP20. Ideal for led strips.

Meanwell power supply code LRS-150-24.

Dimmable LED Power Supply 24V 300W Ultra Thin Transformer for LED Strip LED Driver. Indoor power supply, IP20. Ideal for feeding led strips.

24V protected power supply. Power of 100W, 4.17A. Power supply to be installed both inside and outside the junction boxes. IP20, ideal for led strips. Protected. Ideal to use in the veils or above the wall units thanks to its size, narrow and long.

15watt/meter colored monochromatic cob led strip. The Cob led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led. Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K). Suitable for any type of application such as room lighting, shop lighting, professional studios, products on display or under cabinet, also ideal for creating various kinds of atmospheres. Dimmable led strip. Light beam with 180 ° light opening. Luminous flux of 1350-1500 lm/mt. IP20. 24V power supply. 60 LEDs per meter, number of LEDs: 528 LEDs/m. 5m reel. The led strip can be cut every 10cm.

24V junction box power supply. Power of 200W, 8.4A. Indoor power supply, IP20. Ideal for high power led strips or long stretches of strips. Meanwell power supply with code RSP-200-24.

15watt/meter monochromatic 5m COB LED strip with direct connection at 24V.

The COB led strip is a new model of led strip, ideal for all those who do not like to see the "dots" of the led.

Available in three light colors: warm light (3000K), natural light (4000K) and cold light (6000K).

Suitable for any type of application such as the lighting of residential or work environments, being an outdoor LED strip, it is also used for outdoor settings, in gardens or flowerbeds.

Dimmable LED strip. 180° light beam opening. Luminous flux of 1450-1500-1500lm/m. IP65. 24V power supply. 528 LEDs per meter. 5m reel. The LED strip can be cut every 4.5cm.